點擊圖片查看大圖TPV 8211 - 55物性表
| Physical Properties | Metric | English | Comments | ||
|---|---|---|---|---|---|
| Specific Gravity | 0.930 g/cc | 0.930 g/cc | 23°C; ASTM D792 | ||
| Mechanical Properties | Metric | English | Comments | ||
| Hardness, Shore A | 59 | 59 | 2 mm, 15 sec; ISO 868 | ||
| 60 | 60 | Air at 302°F, 168 hr; ASTM D573 | |||
| Tensile Strength at Break | 4.093 MPa | 593.6 psi | Air at 302°F, 168 hr; ASTM D573 | ||
| 4.60 MPa | 667 psi | Across Flow; ASTM D412 | |||
| Tensile Stress |
2.10 MPa @Strain 100 % |
305 psi @Strain 100 % |
Across Flow; ASTM D412 | ||
| Elongation at Break | 432 % | 432 % | Air at 302°F, 168 hr; ASTM D573 | ||
| 480 % | 480 % | Across Flow; ASTM D412 | |||
| Compression Set | 19 % | 19 % | 158°F, 22 hr; ASTM D395 | ||
| 49 % | 49 % | 257°F, 70 hr; ASTM D395 | |||
| Thermal Properties | Metric | English | Comments | ||
| Brittleness Temperature | -62.2 °C | -80.0 °F | ASTM D746 | ||
| UL RTI, Electrical | 100 °C | 212 °F | UL 746 | ||
| UL RTI, Mechanical with Impact |
90.0 °C @Thickness 1.10 mm |
194 °F @Thickness 0.0433 in |
UL 746 | ||
|
95.0 °C @Thickness 3.00 mm |
203 °F @Thickness 0.118 in |
UL 746 | |||
| Flammability, UL94 |
HB @Thickness 1.10 mm |
HB @Thickness 0.0433 in |
|||
|
HB @Thickness 3.00 mm |
HB @Thickness 0.118 in |
||||
| Processing Properties | Metric | English | Comments | ||
| Processing Temperature | 175 - 230 °C | 347 - 446 °F | |||
| Rear Barrel Temperature | 177 - 191 °C | 351 - 376 °F | |||
| Middle Barrel Temperature | 179 - 193 °C | 354 - 379 °F | |||
| Front Barrel Temperature | 185 - 199 °C | 365 - 390 °F | |||
| Nozzle Temperature | 185 - 210 °C | 365 - 410 °F | |||
| Melt Temperature | 143 - 216 °C | 289 - 421 °F | Processing | ||
| Mold Temperature | 10.0 - 51.7 °C | 50.0 - 125 °F | Processing | ||
| Moisture Content | 0.080 % | 0.080 % | |||
| Back Pressure | 0.345 - 0.689 MPa | 50.0 - 100 psi | |||
| Clamp Pressure | 41.4 - 68.9 MPa | 6000 - 10000 psi | |||
| Vent Depth | 0.00254 cm | 0.00100 in | |||
| Cushion | 0.317 - 0.635 cm | 0.125 - 0.250 in | |||
| Screw Speed | 100 - 200 rpm | 100 - 200 rpm | |||
|
De |
|||||
| Color | Natural Color | ||||
| Form | Pellets | ||||
| Injection Rate | Fast | ||||
| Maximum Regrind % | 20 | ||||
| Screw Compression Ratio | 2:1 - 2.5:1 | ||||
| Screw L/D Ratio |
16:1 - 20:1 |
||||
醫療用品類 復健鞋、醫療鞋、護具、拐杖把手、輪椅等器具輪子、針筒、一次性醫療手套、醫療用輸液袋、拉環蓋、聽診器、醫療用TPR薄膜、滴管吸頭、足部矯正器……等。
運動器材類 潛水蛙鞋、蛙鏡等用具、泳鏡、水上用具、雪靴、健身拉帶、健力球、握力器、瑜珈墊、跑步機配件、球拍把手、高爾夫球桿手柄、健身拍打器、腳踏車踩踏板……等。
工具類 鋸子、螺絲起子、氣動工具、園藝水等手柄、美工刀握柄或飾片、樹剪、花剪、剪刀等手柄、各種五金類工具手柄……等。
文具用品類 筆桿膠套、橡皮擦、印章、書寫矯正器……等。
上海松翰塑化科技有限公司供應產品，品質，TPV、TPU種類齊全.咨詢人褚先生 電話 13721478039 QQ297262310 我公司將給你專業產品加工工藝指導及幫你解決加工工藝難題 歡迎你的咨詢
免責聲明：（1）以上所展示的信息由企業自行提供，內容的真實性、準確性和合法性由發布企業負責，環球塑化網對此不承擔任何保證責任。我們原則上建議您優先選擇“塑企通”會員合作! （2）同時我們鄭重提醒各位買/賣家，交易前請詳細核實對方身份，切勿隨意打款或發貨，謹防上當受騙。如發現虛假信息，請向環球塑化網舉報。
簡繁切換