針焰試驗機

一、試驗標準

First, the test standards
IEC60695-2-2
IEC60695-2-2
GB5169.5-2008 、GB4706.1-2005
GB5169.5-2008, GB4706.1-2005
二、使用范圍
Two, the scope of use
針焰試驗機適用于照明、低壓電器、家用電器、機床電器、電機、電動工具、電子儀器、
Needle flame tester is suitable for lighting, low-voltage electrical appliances, household appliances, machine tools, electric motors, power tools, electronic instruments,
電工儀表、電氣連接件、輔件等電工電子設備及其部件、組件的研究、生產
The research and production of electrical and electronic equipment, such as electrical instruments, electrical connections, accessories, etc.
和質檢部門，也適用于絕緣材料、工程塑料或其它固體可燃材料行業。
And quality inspection departments, also applicable to the insulation materials, engineering plastics or other solid combustible materials industry.
三、針焰試驗機主要技術參數
Three, needle flame test equipment, the main technical parameters
1.針狀燃燒器：內孔 Φ 0.5mm ± 0.1mm ，外徑 ≤Φ 0.9mm ，長 ≥ 35mm，
1 needle burner: hole diameter of 0.5mm + 0.1mm, the outer diameter of more than Phi 0.9mm, length of more than 35mm,
2.燃燒器施焰角度：0- 45°( 任意調節 )
2 burner flame angle: 0- 45 degrees (arbitrary regulation)
3.施燃時間：0-999.9s±0.1s任意可調 (火焰自動進退，無需動手操作)
3 burning time: 0-999.9s + 0.1s (flame adjustable automatic retreat, without manual operation)
4.持燃時間：0-999.9s±0.1s，自動記錄，手動暫停
4 holding burning time: 0-999.9s + 0.1s, automatic recording, manual pause
5.火焰高度：12mm ± 1mm (帶高度測量尺)
5 flame height: 12mm + 1mm (with height measurement)
6.針頭高度：大于35mm（內徑ф0.5，外徑ф0.9）
6 needle height: (diameter greater than 35mm diameter Phi 0.5, Phi 0.9)
7.施燃氣體： 95% 丁烷氣 ( 可采用瓶裝液化石油氣)
7 Application of gas: 95% the use of liquefied petroleum gas (liquefied petroleum gas)
8.氣量大小可調（流量計）
8 volume adjustable (flow meter)
9.溫度測試范圍：0~1000℃
9 temperature measurement range: 0~1000
10.火焰溫度要求：從100℃±2℃升到700℃±3℃的時間在23.5秒±1秒之內
10 flame temperature requirements: from 100 to 2 degrees Celsius to 700 degrees Celsius 3 degrees Celsius in 23.5 seconds
11.測溫熱電偶：Φ0.5mm進口鎧裝（K型）熱電偶
11 thermocouple: 0.5mm diameter (K) imported armored thermocouple
12.傳熱銅塊：Ф4.0x6.0mm
12: heat transfer copper block with 4.0x6.0mm
13.試驗背景：黑背景
13 test background: black background
14.試驗過程：試驗程序自動控制，獨立抽風
14 test: test program automatic control, independent exhaust
15.燃氣報警系統（選配）
15 gas alarm system (optional)
16.觸摸屏控制（選配）
16 touch screen control (optional)
17.參照標準：IEC60695 -11-5、GB/T5169.5-2008、GB4706.1-2005
17 reference standard: -11-5 GB/T5169.5-2008, IEC60695, GB4706.1-2005
18.工作室體積：0.5 立方，（可根據客戶要求定做不銹鋼或0.75 立方箱體 ）
18 studio volume: 0.5 cubic meters, (can be customized according to customer requirements of stainless steel or 0.75 cubic box)
19.設備外尺寸：寬1160mm×深600mm×高1295mm
19 equipment external dimensions: wide 1160mm * Deep 600mm * high 1295mm
工作電壓：AC220V，50Hz
Operating voltage: AC220V, 50Hz
四、針焰試驗機針焰試驗儀隨貨清單
Four, needle flame test instrument with the goods list
1 說明書(保修單) 份 1
1 specification (warranty) copy 1
2 燃燒箱 臺 1
2 combustion chamber 1
3 接物盤 件 1
3 receiving disc 1
4 排風管 根 1
4 exhaust pipe root 1
5 合格證 份 1
5 qualified certificate 1
6 不銹鋼量規 個 1
A 1 gauge stainless steel 6
7 松木板 塊 1
7 pine board block 1
8 電源線 根 1

8 power cord 1