點擊圖片查看大圖塑膠長期代理德國拜耳PC/ABS T88GF20 901510
需要→ 報價，有意→ 者請電議 謝生：13829171386， QQ：294189644 免費提供物性表,本公司所有原料可提供原廠出廠證明COA,SGS等報告!
Bayblend? T88 GF-20 | (PC+SAN)-I-GF | Covestro Deutschland AG
Product Texts
- Rubber modified (PC+SAN) blend
- 20 % glass fiber filled
- optimized heat ageing- and UV-stability
- very good flow
- tensile modulus = 7200 MPa
- high heat resistance
- Vicat/B 120 = 130 °C.
| Mechanical properties | Value | Unit | Test Standard |
| Tensile Modulus | 7200 | MPa | ISO 527-1/-2 |
| Stress at break | 120 | MPa | ISO 527-1/-2 |
| Strain at break | 2.4 | % | ISO 527-1/-2 |
| Thermal properties | Value | Unit | Test Standard |
| Temp. of deflection under load, 1.80 MPa | 119 | °C | ISO 75-1/-2 |
| Temp. of deflection under load, 0.45 MPa | 129 | °C | ISO 75-1/-2 |
| Vicat softening temperature, 50°C/h 50N | 128 | °C | ISO 306 |
| Coeff. of linear therm. expansion, parallel | 30 | E-6/K | ISO 11359-1/-2 |
| Coeff. of linear therm. expansion, normal | 65 | E-6/K | ISO 11359-1/-2 |
| Yellow Card available | Yes | - | - |
| Burning Behav. at thickness h | HB | class | IEC 60695-11-10 |
| Thickness tested (h) | 0.8 | mm | IEC 60695-11-10 |
| Electrical properties | Value | Unit | Test Standard |
| Relative permittivity, 100Hz | 3.3 | - | IEC 60250 |
| Relative permittivity, 1MHz | 3.2 | - | IEC 60250 |
| Dissipation factor, 100Hz | 25 | E-4 | IEC 60250 |
| Dissipation factor, 1MHz | 85 | E-4 | IEC 60250 |
| Volume resistivity | >1E13 | Ohm*m | IEC 60093 |
| Surface resistivity | >1E15 | Ohm | IEC 60093 |
| Electric strength | 35 | kV/mm | IEC 60243-1 |
| Comparative tracking index | 150 | - | IEC 60112 |
| Other properties | Value | Unit | Test Standard |
| Water absorption | 0.4 | % | Sim. to ISO 62 |
| Humidity absorption | 0.2 | % | Sim. to ISO 62 |
| Density | 1290 | kg/m3 | ISO 1183 |
| Rheological calculation properties | Value | Unit | Test Standard |
| Density of melt | 1120 | kg/m3 | - |
| Thermal conductivity of melt | 0.24 | W/(m K) | - |
| Spec. heat capacity melt | 1790 | J/(kg K) | - |
| Eff. thermal diffusivity | 1.2E-7 | m2/s | - |
| Ejection temperature | 130 | °C | - |
| Test specimen production | Value | Unit | Test Standard |
| Injection Molding, melt temperature | 260 | °C | ISO 294 |
| Injection Molding, mold temperature | 80 | °C | ISO 10724 |
| Injection Molding, injection velocity | 540 | mm/s | ISO 294 |
(工程）塑膠原料有限公司提供以下服務:
A.供應塑膠原料 B.解決原料問題 C.免費試料服務 D.高價回收各種水口料及工廠余料E.介紹客戶重酬聯系電話：13829171386謝生歡迎廣大新老客商、聯系洽談！
A.供應塑膠原料 B.解決原料問題 C.免費試料服務 D.高價回收各種水口料及工廠余料E.介紹客戶重酬聯系電話：13829171386謝生歡迎廣大新老客商、聯系洽談！
免責聲明：（1）以上所展示的信息由企業自行提供，內容的真實性、準確性和合法性由發布企業負責，環球塑化網對此不承擔任何保證責任。我們原則上建議您優先選擇“塑企通”會員合作! （2）同時我們鄭重提醒各位買/賣家，交易前請詳細核實對方身份，切勿隨意打款或發貨，謹防上當受騙。如發現虛假信息，請向環球塑化網舉報。
簡繁切換